Allied Pricing Calculator

0% complete

What are the lineal perimeter measurements for the foundation?

Standard Lineal Meters (e.g. 74.07 m for standard cladding)

Brick Rebate Lineal Meters (e.g. 74.07 m for brick cladding)

What is the brick rebate width?

100/120 mm 100/140 mm

Low-Profile Lineal Meters (e.g. 74.07 m for garage door rebates, etc.)

Total Lineal Meters (m)

Disclaimer: QuickSet has endeavoured to present the most accurate information here; however, it disclaims any responsibility for the application of the principles discussed herein.

Version 8 // 21/06/2023

Does the foundation feature any blockwork footings that require edge insulation?

No Blockwork

Has Blockwork

Blockwork Lineal Metres (m)

What is the height of the foundation?

305 mm

320 mm

340 mm

385 mm

400 mm

What is the thickness of the external wall framing?
Please note that QuickSet Ultra is used for 140 mm wall framing.

90 mm

140 mm and above

Do you want to include the QuickSet Ultra top cap?

Yes No

Does your foundation require base insulation?

This information is primarily for quantity surveying purposes as QuickSet does not supply base insulation. We will include the number of base insulation sheets required for your project in your report if you select yes.

Yes

What is the area of the foundation?

m2, used to determine the quantity of insulation sheets needed

What corners does the foundation have?

Please use the guide below to identify what corners your foundation has, where RC refers to rebate corners, SC refers to standard corners, ECB refers to external corner bases, and ICB refers to internal corner bases for walls that are >600 mm in length.

Standard Corners (#)

Brick Rebate Corners (#)

External Corner Bases (#)

Internal Corner Bases (#, for walls >600 mm in length)

Does the foundation have any custom angled corners?

Custom Angle Standard Corner(s)

Custom Angle Rebate Corner(s)

Would you like to add extra formwork?

We round all linear measurements up to the nearest full shutter (2430 mm). As such, especially for jobs requiring many cuts, we kindly suggest incorporating additional formwork to accommodate potential adjustments and ensure a seamless construction process.

After rounding, you currently have a standard lineal surplus of

0 m

After rounding, you currently have a rebate lineal surplus of

0 m

After rounding, you currently have a low-profile lineal surplus of

0 m

Please select how much additional formwork you would like to include.

Additional Standard Formwork (#)

Additional Rebate Formwork (#)

Additional Low-Profile Formwork (#)

Thanks for the info, here are your pricing results!
Please consider using our thermal calculator to view your specific thermal performance details.

QuickSet Pricing Calculator

🎄 Holiday Schedule 🎄