Resources

QuickSet Technical Information

Thermal Modelling

Learn and compare the thermal properties of our products in our latest report. 

Form with No Underslab Insulation

No Underslab Insulation

Standard detailing for QuickSet, QuickSet Ultra, and QuickSet Brick Rebate, all with no underslab insulation. Drawings also for Allied Superslab Codemark. 

25mm XPS Underslab Insulation

Standard detailing for QuickSet, QuickSet Ultra, and QuickSet Brick Rebate, all with 25mm underslab insulation. Drawings also for Allied Superslab Codemark.

50mm XPS Underslab Insulation

Standard detailing for QuickSet, QuickSet Ultra, and QuickSet Brick Rebate, all with 50mm underslab insulation. Drawings also for Allied Superslab Codemark.

75mm XPS Underslab Insulation

Standard detailing for QuickSet, QuickSet Ultra, and QuickSet Brick Rebate, all with 75mm underslab insulation.

Certification & Testing

Allied Concrete Superslab

These resources outline the specifications, construction requirements and Codemark conditions and limitations for the Allied Superslab system, for which QuickSet is the insulation solution.

HILTI Hold-Down Testing

HILTI hold-down testing was undertaken under the direction of HFC Engineering. The product was tested down to 35mm to the centre of the bolt from the inside edge of our 16mm PVC Foam Board face, with a 6mm frame overhang. This was to allow for a worst-case scenario on bolt placement.
The product performed well and met the required kN measurements.

Implementation

Sand Blinding Preparation

To ensure correct application, please refer to our sand blinding requirements below.

Installation Guide

To help with using and installing QuickSet’s products, we’re developing a series of installation guides that are coming soon. Stay tuned!

Want to use QuickSet?