Pricing Calculator

0% complete

What are the lineal perimeter measurements for the foundation?

Standard Lineal Meters (m, for standard cladding)

Brick Rebate Lineal Meters (m, for brick cladding)

Low-Profile Lineal Meters (m, for garage door rebates, etc.)

Total Lineal Meters (m)

Disclaimer: QuickSet has endeavoured to present the most accurate information here; however, it disclaims any responsibility for the application of the principles discussed herein.

Version 16 // 05/04/2024

Does the foundation feature any blockwork footings that require edge insulation?

No Blockwork

Has Blockwork

Blockwork Lineal Metres (m)

What is the height of the foundation?

305 mm

320 mm

340 mm

385 mm

400 mm

What is the thickness of the external wall framing?
Please note that our Ultra range is used with 140 mm wall framing.

90 mm

140 mm and above

Do you want to include the Ultra top cap?

Yes No

Does your foundation require base insulation?

This information is primarily for quantity surveying purposes as we do not supply base insulation. We will include the number of base insulation sheets required for your project in your report if you select yes.

Yes

What is the area of the foundation?

m2, used to determine the quantity of insulation sheets needed

What type of base insulation is used?

EPS + XPS (Base and Perimeter)

SLABX200 (Base Only)

What corners does the foundation have?

Please use the guide below to identify what corners your foundation has. RC refers to rebate corners. SC refers to standard corners. ECB refers to external corner bases. ICB refers to internal corner bases for walls that are >600 mm in length. ERMC refers to external moulded corners. IRMC refers to internal moulded corners.

Standard Corners (#)

Brick Rebate Corners (#)

External Corner Bases (#)

Internal Corner Bases (#, for walls >600 mm in length)

External Rebate Moulded Corners (#)

Internal Rebate Moulded Corners (#)

Does the foundation have any custom angled corners?

Custom Angle Standard Corner(s)

Custom Angle Rebate Corner(s)

Would you like to add extra formwork?

We round all linear measurements up to the nearest full shutter (2430 mm). As such, especially for jobs requiring many cuts, we kindly suggest incorporating additional formwork to accommodate potential adjustments and ensure a seamless construction process.

After rounding, you currently have a standard lineal surplus of

0 m

After rounding, you currently have a rebate lineal surplus of

0 m

After rounding, you currently have a low-profile lineal surplus of

0 m

Please add any additional formwork quantities you would like to include. Note that each unit of formwork is 2430 mm in length.

Additional Standard Formwork (#)

Additional Rebate Formwork (#)

Additional Low-Profile Formwork (#)

Thanks for the info, here are your pricing results!
Please consider using our thermal calculator to view your specific thermal performance details.

We make state-of-the-art permanent formwork to build better homes

Pricing Calculator

Get Started Today!

NEWSLETTER

SITEMAP

🎄 Holiday Schedule 🎄