QuickSet Products

Standard

The QuickSet Standard system comes in 2430mm lengths. Four recycled plastic stirrups are used per length, with a powder-coated H-section joiner and a 90-degree external/internal corner soaker. 

The base features an intuitive click-together system, consisting of three pieces: A 90-degree external corner base; a 90-degree internal corner base; and a 600mm straight piece, each of which clip together. The system is cut to size on-site to desired lengths.

Both the QuickSet form and QuickSet base can be easily modified on-site for different configurations, e.g., unequal angles and wing walls.

The QuickSet base system is designed to be directly clipped together over a damp proof membrane to achieve edge insulation; however, to create a fully insulated system, it can be further supplemented with 25mm, 50mm, or 75mm of base insulation.

Coming by the end of 2022, 385mm and 400mm sizes will also be added to our range and will be suitable for 300mm pod systems.

QuickSet Taper Features

  • Height options of 305mm, 320mm, or 340mm;
  • Suitable for a 220mm pod system;
  • Compatible with 90mm framing;
QuickSet Ultra Features
  • Height options of 305mm, 320mm, or 340mm;
  • Suitable for a 220mm pod system;
  • Compatible for 140mm framing and above;
  • Additional back insulation.

Brick Rebate

The QuickSet Brick Rebate is comprised of two parts: The first is the front form and the second is the insulated permanent formwork rebate, both of which come in 2430mm lengths and are easily joined together with a snaplock powder-coated aluminium clip.

Our standard insulated brick rebate size is 100mm deep by 120mm wide. The brick rebate stirrup can accommodate a 130mm or 140mm wide rebate; these are available by special order.

Four recycled plastic rebate stirrups are used per length, with a powder-coated H-section joiner used to join the form and 90-degree external/internal corner soakers where needed.

As with QuickSet Standard, the QuickSet Brick Rebate base system is designed to be directly clipped together over a damp proof membrane to achieve edge insulation; however, to create a fully insulated system, it can be further supplemented with 25mm, 50mm, or 75mm of base insulation.

Coming by the end of 2022, 385mm and 400mm sizes will also be added to our range and will be suitable for 300mm pod systems.

QuickSet Brick Rebate Features

  • Height options of 305mm, 320mm, or 340mm;
  • Suitable for a 220mm pod system;
  • Compatible with 90mm framing, 140mm framing, and above;

Components

Want to use QuickSet?